Liquid Rotor Starter

Specifications of Liquid Rotor Starter

• The liquid Rotor Starter is manufactured confirming to BS - 140 version of Automatic Motor Operated & Manually Operated. The starter Electrolyte tank is made out of 3mm Thick MS sheet steel and other fabrication is of 2mm MS sheet steel. Epoxy Black Paint (for anti-Corrosion) is done inside the Electrolyte tank. Polypropylene phase barriers are provided. Movement of Moving electrodes are horizontal / vertical type as per requirement. The starter is suitable for two consecutive starts from cold & four starts per hour equally spread in hot conditions. Limit switches for interlocking purpose with spares contacts are provided in automatic version. Electrolyte filling & over flow sockets will be provided. Air break Power contactor of suitable rating is provided to suit RA of motors for final short Circuiting to the resistance.
• For Automatic Version Integral Control box (housed will main MS tank of LRS) of Suitable size will be provided. It will be having RDOL Starter of suitable rating aux. Contactor for reversing & forwarding Pilot motor & the moving electrodes, over load relay, key actuated auto/Manual Selector switch, push button, Isolating Switch, Indicating lamps and Power / Control TBs etc.
• All The motor 7 Switchgear Components used are of reputed quality. The starter is interfaced with consignee's PLC system also. The electrical interlocking circuit will be provided for consignee's PLC systems. The interlocking is such that the main motor cannot be started unless resistance is in fully "In" Position & the main motor will be tripped, if the Electrodes does not reaches to run position within Specified time. Electrolyte level indicator & temperature sensor with alarm & trip contacts can be provided on request.